System Sensor PDRP-2001 - Manual (Page 78)

78 PDRP-2001 Series Manual — P/N 53043:E1 2/28/2011
Programming Master Programming Level
ANN-RLY Options
Pressing 1 for ANN-RLY Options while viewing ANN-BUS Screen #3 will cause the following
screen to be displayed:
The ANN-RLY module provides ten Form-C relays which can be programmed for various
functions. The initial screen displays Relays 1 through 3. Pressing the down arrow key will
display the remaining relays for this module.
To program any of the ANN-RLY relays, while viewing the appropriate ANN-RLY Option screen,
press the number key corresponding to the relay to be programmed. Following is a list of the
available programming options for each relay:
• General Alarm
• General Trouble
• General Supervisory
• Future Use
• Future Use
• Future Use
• General Discharge
• Discharge Release 1
• Discharge Release 2
• AC Loss
• Waterflow Delay
• Future Use
• Future Use
• Future Use
• General 2nd Shot Release
• 2nd Shot Release 1
• 2nd Shot Release 2
• Input Zone 1
• Input Zone 2
• Input Zone 3
• Input Zone 4
• Input Zone 5
• Input Zone 6
PROGRAMMING
1=ANN-RLY OPTIONS
2=ANN-LED OPTIONS
ANN-BUS Screen #3
ANN-RLY OPTIONS
1=RELAY 1 IN ZONE 1
2=RELAY 2 IN ZONE 2
3=RELAY 3 IN ZONE 3
ANN-RLY Options Screen