Teka VT TC 1G - Manual (Page 16)

16
Appliance description GB
Appliance description
The decorative design may deviate from the illustrations.
1. ON/OFF button
2. Plus button
3. Minus button
4. Power setting display
5. Lock button
6. Lock control lamp
7. Dual-circuit/triple-circuit button
8. Dual-circuit/triple-circuit control lamp
Operating the hob with the sensor
buttons
The ceramic glass hob is operated with touch control sensor
buttons. The sensor buttons are operated as follows: lightly touch
a symbol on the surface of the ceramic glass plate. A buzzer will
indicate when the controls have been operated correctly. The
touch control sensor button will then be indicated as “button”.
ON/OFF button (1)
This button is used to switch the entire hob on and off. It is, as it
were, the main switch.
Minus button (3)/ Plus button (2)
These buttons are used to set the cooking levels.
The minus button reduces the setting and the plus button raises
it.
The setting can be deleted by pressing both buttons
simultaneously.
Power setting display (4)
The power setting display shows the power setting which has
been selected, or:
H....................................Residual heat
Decimal point ................Automatic boost function
Lock button (5)
The lock button can be used to lock all of the buttons.
Dual-circuit/triple-circuit button (7)
To activate other heating circuits.