Teledyne LeCroy PXD222 - Manual (Page 35)

Specifications
PXD222-OM-E Rev A ISSUED: November 2001
31
SAFETY
The LeCroy PXD 222 Digitizer is designed for measurements on 300 V Category II Installations,
Pollution Degree 2, per:
EN 61010-1:1993 + A2:1995
CAN/CSA-C22.2 No.1010.1-92
UL3111-1
Max. Input Voltages:
Input Ch 1 and Ch 2 directly.................... 300 V CAT II
Input Ch 1 and Ch 2 via 10:1 probe ........1000 V CAT II
Max. Floating Voltage:
From any terminal to ground................... 300 V CAT II
Between any terminal.............................. 300 V CAT II
Voltage ratings are given as “working voltage.” They should be read as VAC rms (50–60 Hz) for
AC sine wave applications and as VDC for DC applications.
CAUTION
Safety specifications are only valid if
the unit is properly grounded, as
described in the Installation procedure.