Teledyne LeCroy ZS4000 - Manual (Page 13)

Operator’s Manual
923360-00 Rev A 7
Clips and Grabbers
Channel ID Clips The Channel ID Clips can be attached to the
probe cable to quickly identify to which channel
the probe is currently connected: CH1 yellow,
CH2 red, CH3 green, and CH4 blue.
Micro-Grabbers The micro-grabbers are ideal for connecting to
small IC legs or pins very tightly spaced.
QFPIC Clips The QFPIC clips are ideal for connecting to the
legs or pins of Quad Flat Pack ICs.
Probe Holder
Freehand Probe Holder The FreeHand lets you focus on the
oscilloscope screen instead of on maintaining
contact to multiple test points. It allows you to
concentrate on what is really important – the
waveform.
It is designed to keep most of the weight on
the probe tip and will prevent lost contact
when a bump to the table shakes the circuit
under test.