Teledyne LeCroy ADP300_305 - Manual (Page 5)

Operator’s Manual
Safety Instructions
This section contains instructions that must be observed to keep this
oscilloscope accessory operating in a correct and safe condition. You are
required to follow generally accepted safety procedures in addition to the
precautions specified in this section. The overall safety of any system
incorporating this accessory is the responsibility of the assembler of the
system.
Symbols
These symbols may appear on the ADP30x probe body or probe acccessories or
in this manual to alert you to important safety considerations.
WARNING. High Voltage, risk of electric shock.
CAUTION. Potential for damage to probe or instrument it is connected to.
Attend to the accompanying information to protect against personal injury or
damage. Do not proceed until conditions are fully understood and met.
ELECTROSTATIC DISCHARGE (ESD) HAZARD. The probe is susceptible to
damage if anti-static measures are not taken.
DOUBLE INSULATION
PROTECTIVE (EARTH) TERMINAL
923079-00 Rev A 1