Teledyne LeCroy Automation API for Bluetooth Analyzers - Manual (Page 60)

54
Automation API for CATC Bluetooth Analyzers CATC Ver. 1.40
2.5.5 IRecOptions::SetPostTriggerPercentage
Sets the posttrigger buffer size
Parameters
posttrigger_percentage - the size of post trigger buffer in percents of the whole
recording buffer ( see 4.5 )
Return values
E_INVALIDARG – invalid percentage was specified
Remarks
This method call has no effect if recording mode was set to RMODE_SNAPSHOT ( see 4.4 ).
The default setting is 50%.
Example
WSH:
CurrentDir = Left(WScript.ScriptFullName, InstrRev(WScript.ScriptFullName,
"\"))
Set Analyzer = WScript.CreateObject("CATC.Merlin")
Set RecOptions = Analyzer.GetRecordingOptions
RecOptions.SetPostTriggerPercentage 60' 60%
C++:
HRESULT SetPostTriggerPercentage (
[in] short posttrigger_percentage );