Teledyne LeCroy Merlin Mobile - Users Manual - Manual (Page 59)

51
Merlin Mobile User’s Manual CATC SW Version 2.0
If you selected only the second option in Step 12 (=’Passive Sync & Record’), the
following screen will display.
This screen asks you for the address of the Page Target device -- which in this case
is Merlin Mobile. Since the devices in your piconet are not able to respond to
inquiries, Merlin Mobile will not be able to page the devices and join the piconet.
Instead, you will assign Merlin Mobile an address here in this screen, then direct
your piconet Master device to connect to Merlin Mobile. The Master will attempt
to connect to Merlin Mobile and therein give Merlin Mobile the information it
needs to record the Master and slave devices.
Step 13
Type in an address of your choosing for Merlin Mobile (= Page
Target).
You are making up an address for Merlin Mobile that the Master will use to try to
connect to Merlin Mobile.