Teledyne LeCroy SierraFC Automation API - Manual (Page 50)

LeCroy Corporation SierraFC M8-4 API Reference Manual Manual Version 1.00
50
5.1.5 IRecOptions::SetPostTriggerPercentage
HRESULT SetPostTriggerPercentage (
[in] short posttrigger_percentage );
Sets the post-trigger buffer size.
Parameters
posttrigger_percentage Size of the post-trigger buffer in percent of the whole
recording buffer (see IRecOptions::SetBufferSize ).
Return values
E_INVALIDARG – invalid percentage was specified
Remarks
This method call has no effect if recording mode is set to
RMODE_SNAPSHOT
(see IRecOptions::SetRecMode ).
The default setting is 50%.
Example
WSH:
Set Analyzer = WScript.CreateObject("LeCroy.FCAnalyzer")
Set RecOptions = Analyzer.GetRecordingOptions
RecOptions.SetPostTriggerPercentage 60 ' 60%
C++: