Teledyne LeCroy IBTracer 4X - Users Manual Ver.2.20 - Manual (Page 31)

23
IBTracer 4X Protocol Analyzer User’s Manual CATC SW Version 2.2
You can select only one item at this point. If both the BusEngine and
the Firmware need to be updated, the update will complete for the
first item and then return to the above screen so the second update
can be performed.
If you are running Windows 98SE, you will get the following
message when the second update is completed:
Step 6
Power cycle IBTracer to complete the update.
Note
You must power cycle the analyzer for all BusEngine updates.
Manual Updates
You can manually update the IBTracer BusEngine by following these steps:
Step 1 Select Analyzer under Setup on the Menu Bar.