Teledyne LeCroy IBTracer 4X - Users Manual Ver.2.20 - Manual (Page 96)

88
IBTracer 4X Protocol Analyzer User’s Manual CATC SW Version 2.2
Decoding Via the Display Options Dialog Box
The Display Options dialog box has options for issuing decode commands.
To issue a command,
Step 1
From the menu bar, select
Setup>Display Options.
Step 2
From the checkboxes under Trace Viewing Level, select the the
desired level of decoding. Your choices are:
• Packets
• Transport Functions
• Management Datagrams
• Subnet Administration
• Sockets Direct Protocol
• SCSI RDMA Protocol