Teledyne LeCroy Protocol Analyzers File-Based Decoding User Manual - Manual (Page 76)

File-based Decoding User Manual
70
LeCroy Corporation
B.2 Input Context Data
The Merlin application decodes several layers of Bluetooth protocol and provides input
context as follows:
Packet Level
in.Data: Data block (packet payload) [null if no data in packet]
in.DataLength: Length of packet payload [null if no data in packet]
in.ScoData: SCO data block (voice) [null if no SCO data in packet]
in.ScoDataLength: Length of SCO data [null if no SCO data in packet]
in.Slave: 1 = Slave; 0 = Master
in.AmAddr: Am address
in.Type: Type of packet
in.Flow: Packet flow bit
in.Seqn: Packet seqn bit
in.L_CH: Packet L_CH value
L2CAP
in.Data: L2CAP data block
in.DataLength: Length of data block
in.Slave: 1 = Slave; 0 = Master
in.AmAddr: Am address
in.Cid: L2CAP CID value
RFCOMM
in.Data: RFCOMM data block
in.DataLength: Length of data block
in.Slave: 1 = Slave; 0 = Master
in.AmAddr: Am address
in.Dlci: RFCOMM dlci value
HDLC and PPP
in.Data: HDLC data block
in.DataLength: Length of data block
in.Protocol: PPP protocol value
in.Slave: 1 = Slave; 0 = Master
in.AmAddr: Am address