Teledyne LeCroy Summit T28 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 68)

Teledyne LeCroy Link Settings
56 Summit T28 PCI Express Multi‐Lane Protocol Analyzer User Manual
5.13.1 Viewing Multisegmented Files
If Save As MultiSegment Trace is enabled in the General tab of the Recording Options, the
PETracer divides the CATC Trace into segments and stores them on the host machine's
hard drive. Segment size is set in the MB Segments box. Enter a value from 4 MB to 128
MB.
PETracer also creates an index file that provides a brief summary of each segment and
hyperlinks to each of the segments. Double‐clicking a segment summary in the index file
causes PETracer to open that segment.
You can also navigate through the segments by clicking the buttons on the Multisegment
toolbar.
5.14 Link Settings
The Link options panel allows you to manage links (see Figure 5.11 on page 56 ). You can
define the basic link parameters or leave it on Auto detect. The various link settings are
described in this section (see
Figure 5.1 on page 48 : 3).
Figure 5.11: Link Options for Summit T28
5.14.1 Speed
The Speed can be set at Auto, 5.0 GT/s, or 2.5 GT/s from the drop‐down menu. The
default is Auto (see
Figure 5.1 on page 48 : 3A).
Auto: When set to Auto, the hardware auto‐determines the speed.