Teledyne LeCroy SAS_SATA Protocol Suite Verification Script Engine Reference Manual - Manual (Page 22)

22
5.2.8.2.2 Report Manufacturer Info Frame members
in.Trp_ReqLength
5.2.8.2.3 Discover Frame members
in.Trp_Ignorezonegroup
in.Trp_PhyId
Note: Follow the same procedure explained in
Section 5.2.4 for the remaining
Command/Function/OpCode specific frame members:
5.2.8.2.4 Read GPIO register
5.2.8.2.5 Report self-configuration status
5.2.8.2.6 Report zone permission table members
5.2.8.2.7 Report zone manager password members
5.2.8.2.8 Report broadcast members
5.2.8.2.9 Report phy error log members
5.2.8.2.10 Report phy SATA members
5.2.8.2.11 Report route information members
5.2.8.2.12 Report phy event members
5.2.8.2.13 Discover list members
5.2.8.2.14 Report phy event list members
5.2.8.2.15 Report expander route table list members
5.2.8.2.16 Configure general members
5.2.8.2.17 Enable disable zoning members
5.2.8.2.18 Write GPIO register members
5.2.8.2.19 Zoned broadcast members
5.2.8.2.20 Zone lock members
5.2.8.2.21 Zone activate members
5.2.8.2.22 Zone unlock members
5.2.8.2.23 Configure zone manager password members
5.2.8.2.24 Configure zone phy information members
5.2.8.2.25 Configure zone permission table members
5.2.8.2.26 Configure route information members