Teledyne LeCroy SAS_SATA Protocol Suite Verification Script Engine Reference Manual - Manual (Page 38)

38
9.6 DontSendChannel()
This function specifies that events that have occurred on the specified channel should NOT be
sent to the script.
Format :
DontSendChannel ( channel )
Parameters
channel
This parameter can be one of the values of the SendChannel() command
(see above).
Example
…
DontSendChannel ( _I1 ); # DO NOT send events from Channel I1.
9.7 SendAllChannels()
This function specifies to send all events with any channel.
.
Format :
SendAllChannels ()
Example
…
SendAllChannels (); # Send events from ALL channels.
9.8 SendTraceEvent()
This function specifies the events to be sent to the script.
Format :
SendTraceEvent( event )
Parameters
event
Refer to Verification Script Engine Events for all possible values.
_FRM_PRIMITIVE Primitve event
_FRM_OOB_SIGNAL OOB Sequence Event
_FRM_AF_OPEN Open Address Frame Event
_FRM_AF_IDENTIFY Identify Address Frame Event
_FRM_SSP SSP Frame Event
_FRM_SMP SMP Frame Event
_FRM_STP STP Frame Event
_FRM_STP_INCOMPELETE Incomplete Frame Event
_FRM_DEVICE__SLEEP Device Sleep Event
Example
…
SendTraceEvent( _FRM_AF_OPEN );