Teledyne LeCroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual - Manual (Page 130)

Teledyne LeCroy Emulation
128 Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
 Configure general
 Enable disable zoning
 Write GPIO register
 Zone broadcast
 Zone lock
 Zone activate
 Zone unlock
 Configure zone manager password
 Configure zone phy information
 Configure zone permission table
 Configure route information
 Phy control
 Phy test function
 Configure phy event
 Configure Zone Permission
Adding a Frame
SAS: Click the Insert Frame button and choose the frame type to insert.
Figure 2.100: SAS: Frame Dropdown List
Note: SSP and STP frames offer additional options.
The following menu options are available:
 Identify Frame
 SSP Frames (Command, Data, Task)
 SMP Request Frame
 STP FRames (Host to Device, DMA Setup, Data)
 User Defined