Teledyne LeCroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual - Manual (Page 53)

Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual 51
Start Recording Teledyne LeCroy
2.4.2 SATA Main Toolbar
The following figure displays the SATA main toolbar.
Figure 2.4: SATA: Software Menus and Toolbar
2.5 Start Recording
To get an immediate overview of the bus traffic to and from your Analyzer:
1. Click the Record button.
2. The analyzer begins filling the defined memory buffer with traffic captured from the
bus. After the traffic fills the memory buffer, the traffic is uploaded to the viewer and
the Packet View display opens. Packet View is the default display. However, more
views are available by selecting View on the menu bar and choosing the desired
View (see
Figure 2.5 on page 52 ).
Open Project File
Launch Trainer
Launch Jammer
Abort Capturing Without Saving Sample File
Start Device Emulator
Open Find Device Dialog
Upload Manager
Start Recording
Stop Device Emulator
Save
Stop Recording
Manual Trigger