Teledyne LeCroy USB Chief - Users Manual - Manual (Page 107)

99
Chief User’s Manual CATC Version 1.7
The Power and Connection window appears.
Step 5 Select Detach under Host Connection.
Note You must leave the Power and Connection window open while you generate
traffic. If you close the window, the Power and Connection settings revert to the
default (the Host Connection is attached), and you cannot generate traffic.
Generating Traffic Without a Device Connected
You can generate traffic without having a USB device connected to the Analyzer.
After completing the steps above, in the Power and Connection window
Step 1 Select Detach under Device Connection.
Step 2 Select D+ Pull Up under Internal Termination to record at Full Speed
OR
Select D- Pull Up under Internal Termination to record at Low Speed.
Note Leave the Current Measure in the default OFF setting while generating traffic.
Opening a Traffic Generation File
To open a Traffic Generation file,
Step 1 Select Open under File on the Menu Bar
OR
Click on the Tool Bar.