Teledyne LeCroy USB Chief - Users Manual - Manual (Page 83)

75
Chief User’s Manual CATC Version 1.7
Chapter 9: Other Features
Search
The Search feature provides several options for searching through recorded
traffic, allowing you to find specific packets based on triggering status, packet
number, marking, or content.
To view the Search options,, click Search in the Menu bar to display the following
drop-down menu:
Go to Trigger
Note Go to Trigger is enabled only when a traffic file is the result of a Trigger.
To display a Trigger Event, select Go to Trigger under Search on the Menu Bar.
The Trace View is repositioned with the first packet following the Trigger event
(or the packet that caused the Trigger) at the top of your screen.
Go to Packet
To display a specific packet, follow these steps
Step 1 Select Go to Packet under Search on the Menu Bar.
The Go to Packet window appears.
Step 2 Enter the number of the packet you want to display.