Teledyne LeCroy UWBTracer Automation Manual - Manual (Page 30)

LeCroy UWBTracer Automation API Reference Manual Manual Version 3.02
26
3.2.4 IUwbAnalyzer2::ResumeGeneration
HRESULT ResumeGeneration ();
Resumes the generation paused by the PauseGeneration command.
Parameters
None
Return values
ANALYZERCOMERROR_ANALYZERNOTCONNECTED Analyzer is not connected
ANALYZERCOMERROR_WRONGCALL
Analyzer is not paused
Remarks
Resumes the generation paused by the PauseGeneration method. The generation returns to the
running state from the paused state.
Example
Wsh:
Set Analyzer = WScript.CreateObject("CATC.UWBAnalyzer", "Analyzer_")
'Tell the CATC UWB analyzer to start generation.
Analyzer.StartGeneration "example.uwbg"
WScript.Sleep 3000
'Tell the analyzer to stop recording.
Analyzer.PauseGeneration()
WScript.Sleep 3000
Analyzer.ResumeGeneration()
VBScript:
<OBJECT
RUNAT=Server
ID = Analyzer
CLASSID = "clsid:EE43DE29-65CA-4904-B111-32919E00D061"
>
</OBJECT>
<SCRIPT LANGUAGE="VBScript">
<!--
Sub BtnResumeGeneration_OnClick
On Error Resume Next
Analyzer.ResumeGeneration
If Err.Number <> 0 Then
MsgBox Err.Number & ":" & Err.Description
End If
End Sub
-->
</SCRIPT>