Teledyne LeCroy Voyager Exerciser Generation Script Language Manual - Manual (Page 101)

Teledyne LeCroy Voyager USB 3.0 Exerciser Generation Script Language Reference Manual
92
9.17.5 Trace_B Instruction
You can instruct the application to display a trace message in the application output window. The
script stops and does not proceed until the application displays the trace message.
Format
Trace_B( trace_message )
trace_message: Trace message to display.
Note: This instruction blocks script execution to guarantee trace message display. However, this
can break precise timing sequences. Use the Trace instruction (see above) if you do not want to
block script execution.
Examples
Main
{
Send TX_PACKET
Send TX_PACKET
Trace_B(
"2 packets were sent." ) # Blocks script execution.
Send TX_PACKET
Send TX_PACKET
Trace_B(
"4 packets were sent." ) # Blocks script execution.
}