Teledyne LeCroy Voyager Exerciser Generation Script Language Manual - Manual (Page 87)

Teledyne LeCroy Voyager USB 3.0 Exerciser Generation Script Language Reference Manual
78
Example
Main
{
# Send some packet.
Send TX_PACKET
# Instructs LTSSM to jump to the Recovery state
.
SetLinkState( RECOVERY )
# Instructs LTSSM to jump to the U0 state .
SetLinkState( U0 )
# Send the next packet.
Send TX_PACKET
# Send the next packet.
Send TX_PACKET
}
Note on Removing/Applying Vbus:
For Host Emulation in order to remove or apply Vbus to the link, use functions Host_RemoveVbus() and
Host_ApplyVbus() defined in the HostVbus.ginc supplied in the Generation include folder.
Example
Main
{
…
# Remove Vbus
Call Host_RemoveVbus()
# Keep Vbus off for 800 milliseconds
TxSleep( 800000000 )
# Apply Vbus
Call Host_ApplyVbus()
…
}