Setting up jitter measurements, Jitter math setup – Teledyne LeCroy JTA2 User Manual

Page 13

Advertising
background image

JTA2-OM-E Rev A

ISSUED: December 2003

11

SETTING UP JITTER MEASUREMENTS

Jitter Math Setup

1. Touch

Math in the menu bar, then Math Setup... in the drop-down menu.

2. In the "Math" dialog, touch an unused Fx button to simply make a selection from the

Select Math Operator menu. Or, touch an Fx tab

for more setup

options.

Note: By default, unused Fx positions are designated as zooms of C1. However, the traces are disabled, as indicated by
an unchecked On box alongside the Fx button:

3. Touch

the

Jitter Functions button in the Select Math Operator menu for a list of

persistence functions.

Advertising
See also other documents in the category Teledyne LeCroy Software: