Teledyne LeCroy QPHY-MOST150 - Manual (Page 18)

18
920456 Rev B
Input Row For Relevant Zi Models
Specifies whether to use the A or B inputs when a Zi model oscilloscope with multiple input rows is
detected. Row A (Top Input Row) is the default.
Path to Demo waveforms
Specifies the location of the stored waveforms for Demo Mode.
QPHY-MOST150O LIMIT SETS
The limits in use by QPHY-MOST150o are the ones specified in the MOST150 oPHY Automotive
Physical Layer Sub-Specification Rev. 1.1, 05/2010.
QPHY-MOST150O TEST DESCRIPTIONS
For additional information about the tests supported by QPHY-MOST150o please refer to the
MOST150 oPHY Automotive Physical Layer Sub-Specification Rev. 1.1, 05/2010.
Figure 9 - Location of Test Points