Test 1.2 spread spectrum tests, Figure 11 - test report from lfps tests, Qphy-usb3-tx-rx software option – Teledyne LeCroy QPHY-USB3-Tx-Rx User Manual
Page 27
Advertising
QPHY-USB3-Tx-Rx Software Option
917719 Rev
A
27
Figure 11 - Test Report from LFPS Tests
Test 1.2 Spread Spectrum Tests
The purpose of this test is to measure the spread spectrum modulation frequency and deviation and verify that
they are within the specification limits.
At the completion of the Spread Spectrum Tests the oscilloscope is in the following configuration:
Figure 12 - Oscilloscope Configuration after SSC Tests
Advertising