Teledyne LeCroy QPHY-USB - Manual (Page 47)

QPHY-USB Software Option
QPHY-USB Operator’s Manual Rev F
47
The first 4 items in the previous list are contained within the LeCroy Test Fixtures. The following figure shows the
sections of the fixtures used for these tests.
Figure 50. FS/LS Signal Quality Test Fixture Sections
Droop
Test Red Squares Indicate Load Connectors.
Switch Position Selects 100 or 500 mA Load.
Signal
Quality
Fixtures
(SQIDD)
Current Loop for
Inrush Tests