Tracer TP-9366 PRO-DigiScale AM08044 - Manual (Page 3)

Introduction
The Tracerline
® PRO-DigiScale™ Refrigerant Scale offers an
innovative design in refrigerant measurement and charging.
Use the PRO-DigiScale for manual recovery and/or charging
measurement. The weigh platform and control hand piece are
not restricted to an individual PRO-DigiScale. Each component is
interchangeable with other PRO-DigiScale products and can be
replaced at any time.
The PRO-DigiScale’s few controls allow for easy operation. See
the diagram for the location of items on the scale.
A Communication Cable: The communication cable connects
the weigh platform and the control hand piece. Insert an end of
the cable into each component. Ensure the cable is secure by
listening for a “click” when attaching the cable.
B Battery: The PRO-DigiScale operates on a 9 volt DC alkaline
battery. Install the battery by sliding open the access door in the
back of the control hand piece and snapping it onto the connector.
C On/Off Switch: Press the button once to either turn the
PRO-DigiScale on or off. When turned on, the unit will step
through an initialization test.
D Unit Selection: The PRO-DigiScale will display weight
measurements in pounds (XXX.XX lbs), pounds and ounces
(XXX lbs XX.XX oz) or kilograms (XXX.XX kg). Push this button to
toggle between selections.
4