Tracer TP-9366 PRO-DigiScale AM08044 - Manual (Page 4)

E Tare (Zero): This button allows you to manually zero the
PRO-DigiScale at any time during operation. NOTE: When fi rst
turned on, the unit will automatically zero.
F Display: Indicates how much weight has been placed on or
taken off the weigh platform. The display will show positive and
negative values. If the scale goes over its weight limit, the display
will say “Over Range.” When the battery becomes low the display
will say “Low Battery” (steady at fi rst but fl ashing when the scale
is about to shut off).
When the battery power is too low to get an accurate reading,
only “Change Battery” will show on the display. If the scale
cannot auto zero because maximum weight is exceeded during
initialization, the message “Remove Weight” will be displayed.
5
A
B
C
D
E
F