TREND 963 Installation - Manual (Page 11)

Installation
2.7 Install the 963 Software
The installation of the 963 software is performed by a step-by-step installation program. During the installation
procedure you will be required to enter the serial number for the software. This located on the back of the CD case;
you should keep this number in a safe place because it will be required when you purchase a licence.
Note that if a full version of SQL Server 2000 is already installed then 963 will not upgrade the SQL server. SQL
Server must then be upgraded to a full version of SQL Server 2005 separately. The installation will install SQL
Server 2005 Express with Advanced Services operating in Mixed (SQL) mode. If MSDE 2000 is installed it will
upgrade to SQL Server 2005 Express with Advanced Services. If an earlier SQL version is installed the installation
will fail and it will be necessary to uninstall the earlier version before 963 can be installed.
To install the software:
1. Log on to the PC as someone with Administrator rights.
2. Insert the CD into the CD-ROM drive, and wait for the installation screen to appear.
Note that if autorun is disabled run SETUP.exe from the CD.
3. Follow the instructions on the screen.
2.8 License 963
Before 963 can be used, it must be licensed. The licence will allow you to run 963 on a single PC. If you wish to run
963 on another PC, another licence must be purchased, or the existing licence transferred to the other PC as
described in the 'Transfer the Licence to a Different PC' section of these instructions.
If 963 is already licensed, and you want to upgrade the licence to allow client/server operation, or more clients,
contact us and purchase the appropriate upgrade. You will then be provided with a new site key that must be entered
before the new facilities will be available.
To licence 963:
1. Obtain an unlock code as described in the ‘Obtain an Unlock Code’ section of these instructions.
2. Enter the unlock code as described in the ‘Enter the Unlock Code’ section of these instructions.
The 963 uses CrypKey to perform the licensing functions. CrypKey may not work after disk defragmentation using
Speed Disk included in Norton utilities. This problem may exist with other defragmentation programs; see the
‘Problems with Defragmentation Programs’ section of the 963 Engineering Manual (TE200637).
The use of virus scanning and anti spyware programs may also cause problems with the licence as the may remove
one of the CrypKey files, see the ‘Problems with Virus Scanning and Anti Spyware Programs’ section of the 963
Engineering Manual (TE200637).
2.8.1 Obtain an Unlock Code
To licence 963 it is necessary to obtain an unlock code.
To obtain an unlock code:
1. Run 963.
2. Log in as someone with a PIN level of 99.
3. Press F1 to display the Information Centre.
4. Click . The Licence Editor dialogue box is displayed.
963 Installation Instructions TG201026 Issue 09/01/2009 2 11