TREND TW_S - Manual (Page 3)

TW/S Wireless Space Temperature Sensor Installation Instructions TG200781 Issue 1/C 25/04/07 3
Installation Instructions TW/S
INSTALLATION (continued)
Note Identification Number
5
Assemble unit 6
backplate ‘click’
Install and Configure
XW/R/IQ Receiver 7
Test System 9
000016746
00016746
000016746
00016746
XW/R/IQ Installation Instructions TG200783
I Q
Δ T
TW/S
XW/R/IQ
Removable identification label for installer’s own use
000016746
00016746
‘location’
Configure IQ 7
TW/.., PCW/.., XW/R/IQ Data Sheet TA200780
For IQ3 the sensor’s target analogue node must
be created using SET. An example strategy
including decoding of alarm bits is given in the
TW/.., PCW/.., XW/R/IQ Data Sheet
2 mins.
Check for alarm bits
BIT1 : Low Battery
BIT2 : Sensor fail
BIT3 : Loss of reception
see TW/.., PCW/.., XW/R/IQ Data Sheet, for
decoding of alarm bits.