Vanguard VUS (Auto-Ohm 200 S3, DMOM-200 S3, DMOM-600,CT-3500 S2, VBT-80P) - Manual (Page 16)

REV 1 VUS VERSION 2.x SOFTWARE MANUAL
14
4.2 Retrieving Test Records from a Connected Unit
Follow the steps below to retrieve one or more test records from a connected Vanguard unit:
1. Make sure the VUS application is running. Connect the unit to the PC via either the RS-
232C or USB port and turn on the power.
2. Click on the Retrieve icon in the Test command group in the Command Ribbon.
3. The following window will be displayed listing a directory of all the test records stored in
the unit's internal memory:
4. You can select a shot to be retrieved by clicking on the shot number. The selected
record will be highlighted. You may select multiple records by holding down the [CTRL]
key and clicking on the shot numbers. All selected records will be highlighted. You may
de-select a selected record by holding down the [CTRL] key and clicking on the selected
shot number a second time.
The "File Prefix" input field allows you to enter a word that will be used as a prefix for
the file name for the stored record on the PC hard drive. When a test record is retrieved
from the unit and stored on the hard drive, the file name is in the "n.test" format, where
"n" is the record number. So if you would like the file name to be "Test_n.test", enter
the word "Test_" in the "File Prefix" input field.
5. Click on the "Download Test(s)" button to retrieve the selected test records from the
connected unit and store them in the default test record folder. Click on the "OK"
button when done retrieving the desired test records.