Vanguard VUS (Auto-Ohm 200 S3, DMOM-200 S3, DMOM-600,CT-3500 S2, VBT-80P) - Manual (Page 22)

REV 1 VUS VERSION 2.x SOFTWARE MANUAL
20
4.3.4. Editing the Record Header Information
You can edit the test record's header information as well as the comments for each test by
clicking on the Edit icon in the Test command group in the Command Ribbon. The following
screen will be displayed:
Make any changes to the test record header information as necessary (such as the Company
name, Station Name, etc.). You can also add comments for each test listed by clicking in the
comment section to the right of the test number and typing your comments. Click on the "OK"
button when done.
4.3.5. Saving Test Records
Click on the Save icon in the Test command group in the Command Ribbon to save any changes
made to the test record.
If you would like to save the test record as a different file name, click on the VUS Menu Button
and then select Save As... from the drop-down menu. Navigate to the folder where you would
like to save the file, type the file name for the new file, and then click on the "Save" button.