Ct-6500 operating instructions – Vanguard CT-6500 User Manual
Page 12
CT-6500 Operating Instructions
5
3.6 Slow-Close Test Results
A Slow-Close test determines the contact touch distance and penetration by using the travel
transducer and dry contact channels.
4.0 Test Result Graphics
4.1 Thermal Printer Graphic Printout
A 4.5 inch wide, built-in, thermal printer can output graphic waveforms of the contact channels,
travel curves and actuator-coil currents. Using the Zoom Graphics Mode, the user can enlarge the
graphical outputs by specifying the timing zone. Typical graphical results are shown in Figures
11.0 and12.0.
5.0 CT-6500 Controls and Display
Before using the CT-6500, users should become familiar with all of the controls and display
indications. The keypad and display are used to operate the CT-6500. Figure 1.0 represents the
control panel and the numbered lines pointing to each control and indicator refer to Table 1.0,
which describes the function of each control and indicator.
Figure 1.0 CT-6500 Control Panel