Vanguard CT-6500 - Manual (Page 57)

CT-6500 Operating Instructions
50
9.17 Automatic Print Setting
The CT-6500 can be set to print graphs and tabulated results automatically after each timing
shot. To turn on the “Auto Print Results” mode, follow the steps in Table 22.0.
Table 22.0 Automatic Print Setting
STEP OPERATION ACTION DISPLAY
1 SELECT SET UP MENU. PRESS # 3 KEY. 1. ANALYSIS POINT
2. MEASUREMENT UNITS
3. SAVE / RESTORE
4. NEXT PAGE
2 SELECT NEXT PAGE. PRESS # 4 KEY. 1. SHOT DESCRIPTION
2. COMPUTER ITF
3. SET CLOCK
4. SET PRINT MODE
3 SELECT SET PRINT. PRESS # 4 KEY. SET PRINT MODE
1. AUTOMATIC PRINT
2. BY REQUEST ONLY
4 SELECT “AUTOMATIC PRINT”. PRESS # 1 KEY. 1. TIME BREAKER
2. GET RESULT
3. SET UP
4. DIAGNOSTIC
NOTE
Select print “BY REQUEST ONLY” will disable the “Automatic Print” mode.