Vestil CC-30-MC - Manual (Page 28)

27 Help Line: 800-363-2488 October 15
th
, 2001
ON THE SITE (continued)
ASSEMBLY OF THE WRAPAROUND® REGULAR SECTION
Assembled: Ready for Use
Polyethylene Plastic Wall
Thickness (inches): 1/8”, or 5/32”, or 3/16”
Thickness (metric): 3.2 mm, or 4 mm, or 5 mm
1. Remove 5 eyebolts from the cable assembly clip
2. Lay down section with U-bolts facing the ground
3. Wrap the ends of the section together
4. Align and mate the 5 studs with the 5 holes
5. Insert 5 supplied eyebolts into studs. Hand tighten
6. Pass the red elastic rope through all 5 eyebolts
7. Tie the elastic to the lowest eyebolt
8. With the elastic in place the eyebolts cannot vibrate out
TO USE:
Saf ety
Not ice
Your Name
Here
Your Name
Here
Eyebolts
(store on clips)
Red Rope
Flat: Ready for Transport / Storage
Heavy Duty
Aluminum
Flat Bar
(on each side)