Vestil EFHD - Manual (Page 2)

rev. 2/15/2013 Product manual, operation instructions.doc
HAZARD IDENTIFICATION: explanation of signal words
This manual uses SIGNAL WORDS to indicate the likelihood of personal injuries, as well as the probable
seriousness of those injuries, if the product is misused in the ways described. Other signal words call attention to
uses of the product likely cause property damage.
The signal words used appear below along with the meaning of each word:
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or
SERIOUS INJURY. Use of this signal word is limited to the most extreme
situations.
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or
SERIOUS INJURY.
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or
MODERATE injury.
Identifies practices likely to result in product/property damage, such as operation that
might damage the product.
Each person who assembles, installs, uses, or maintains this product should read the entire manual and fully
understand the directions in advance. If after reading the manual you do not understand an instruction, ask
your supervisor or employer for clarification, because failure to adhere to the directions in this manual
might result in serious personal injury.
SAFETY GUIDELINES
Vestil diligently strives to identify foreseeable hazards associated with the use of its products. However, material
handling is inherently dangerous and no manual can address every conceivable risk. The end-user ultimately is
responsible for exercising sound judgment at all times.
Electrocution might result if any part of the product contacts electrified wires. Reduce the likelihood of
electrocution by applying common sense:

DO NOT contact electrified wires with any part of this device, your body, or clothing.
 DO NOT use or store the product where contact with electrified wires is likely.
 Always inspect the usage area before using the product & implement precautions that account for conditions.
If this product is used improperly or carelessly, the operator and/or bystanders might sustain serious
personal injuries or even be killed. To reduce the likelihood of injury:
 Failure to read and understand the entire manual before assembling, installing, using or servicing the
product is a misuse of the product.
 Read the manual to refresh your understanding of proper use and maintenance procedures.
 DO NOT attempt to resolve any problem(s) with the product unless you are both authorized to do so and certain that
it will be safe to use afterwards.
 DO NOT modify the product in any way UNLESS you first obtain written approval from Vestil. Unauthorized
modifications might make the lift unsafe to use.
 DO NOT exceed the maximum rated load (see Label 287 on product).
 ALWAYS Center and evenly distribute every load placed on the truck. DO NOT pile materials on the platform to a
height that makes the truck wobbly or unstable.
 Because the casters/wheels of the cart are inset from the corners of the platform, the cart will tip forward or backward
if loads are applied to the front or back of the platform. DO NOT apply any load to either end of the platform. All loads
must be centered (on the platform). When properly loaded, the cart should not tilt or tip.
 Inspect the product before each use.
A. DO NOT use this product if the inspection reveals structural damage. Examples of structural damage include,
but are not limited to, the following: 1) Cracked, broken or significantly deformed load-bearing members; 2)
cracked welds; 3) corrosion, severe wear, or other condition that affects the ability of the product to support
weight or itself. Replace each part that fails to pass an inspection, and DO NOT use the product until it is fully
restored to normal condition.
B. DO NOT use the product if any unusual noise or movement is observed. If a malfunction occurs, remove the unit
from service and notify your supervisor & maintenance personnel about the issue.
 DO NOT use this device UNLESS all product labels (see “Label Placement Diagram”) are readable and undamaged.
Proper use, maintenance, and storage are essential for this product to function properly. Always use
this product in accordance with the instructions in this manual and consistent with any training relevant to machines,
devices, etc. used in conjunction with this product. Keep the product clean & dry. Lubricate moving parts.
Copyright 2013 Vestil Manufacturing Corp. Page 2 of 7