Vestil LAD-RF User Manual
Page 10
Instruction 4: Insert the axle into the axle-receiving opening of the back leg weldment as shown. A few
inches of the axle should protrude from the opening at each end of the leg weldment. Examine the
horizontal braces (3); notice that each brace has an end with a large hole (circled) and a small hole. Attach
the horizontal braces to the axle through the large hole.
Axle
receiving
opening
Back Leg
Weldment
Horizontal
Brace
Axle
2
3
Instruction 5: Attach each of the 10in. wheels (5) to the exposed portion of the axle. Notice that the
wheels have different faces. One face has a raised center; the other face does not.
Exposed
Portion of Axle
Raised
Center
Instruction 6: Secure each wheel to the axle with a cotter pin (D). Insert the pins into the pin receiving
holes at each end of the axle; then bend the arms of the pins around the axle (towards the pin head).
Bend
Arms
Pin
Receiving
Hole
Cotter
Pin
1
2
3
10