Control overview – Warner Electric CBC-1000 User Manual
Page 7
5
Warner Electric • 800-825-9050
P-275 • 819-0496
144.0001
CBC-1000
WARNER ELECTRIC
E.W. PGM
CNT EDIT
BRK BCH
MOV PST
1
COUNT
2
MOV PST
3
E.W.
4
5
9
0
6
BATCH
7
BCH PST
8
BRK DIS
EDIT
RUN
PGM
RESET
CLEAR
START
STOP
Metal Enclosure
• Improves Noise Immunity
• Eliminates RFI Emissions
• High Strength for Industrial Environment
Auxiliary Supply
Encoder Inputs
Control Inputs
Control Outputs
Display and Mode Annunciators
Display Function Keys
Numeric Keys 0-9
Start Key
Stop Key
CURSORS
RUN/PGM
RESET/CLEAR
EDIT
Neoprene Gasket Seal
AC Power Input
Serial Data I/O
Large LED Display
Sealed Front Panel
• NEMA 4 Rated
• 7 Decades
• High Intensity, High Contrast
• RS-422A/485
• Up to 32 units may be bussed together
• 115/230 VAC Selectable
• Built-in Line Filter
• Non-volatile Memory
• Used to enter the EDIT mode
to alter presets. Press again to
exit the EDIT mode
• Enabled by Programming Line
6 in the “off” position
• Resets the controller during operation
if Programming Line 5 is “on”
• Resets the Batch Counter if it
is being displayed
• Acts to clear the display in the
EDIT and PGM modes
• Used to switch between the RUN and
PGM modes
• UP: moves display toward top of program list in PGM mode
• RIGHT: moves display on same line in PGM mode
• DOWN: moves display thru programming steps in PGM
mode
• Used to initiate brake
• Used to initiate clutch
• Used to enter numeric
data in the EDIT and PGM modes
• COUNT: displays encoder input in engineering units
• MOV PST: displays desired length
• E.W.: displays desired duration of Early Warning
• BATCH: displays current batch count
• BCH PST: displays batch preset
• BRK DIS: displays stopping distance
• Displays the operation of the controller
(CNT, PGM, EDIT)
• Indicates what is being shown on the display
(MOV PST, E.W., BCH, BCH PST, BRK DIS)
• Start
• Early Warning
• Brake On (Stop)
• Zero Speed
• Zero Speed + Delay Time 1
• Zero Speed + Delay Time 2
• Auxiliary Start
• Batch Complete
• Start
• Stop
• Continuous/Single
• Reset
• Quadrature
• 12 VDC @ 175mA
Control Overview