Warner Electric AT Brake–Major Service Repair Instructions for Sizes 25, 55, 115 - Manual (Page 6)

6
15. Install the hub into the bearing by supporting
on the inner race of the bearing and press-
ing on the outer end of the hub. Press until the
inner race of the bearing is flush with the
shoulder on the hub. (See Figure 1)
Install the retaining ring on the hub adjacent to
the bearing.
16. Clean all foreign material from the magnet
mounting surface. Install new friction
material segments from the kit.
14. Install shim and backplate.
Clean the removed hardware and apply one
drop of Loctite grade AA or equivalent to each
screw thread before threading into holes.
Tighten the screws to the appropriate torque
for your size unit:
Size Torque
25 16-20 in.lbs.
55, 115 30-35 in.lbs.
Press
Hub
Magnet
Assembly
Support
Figure 1
Warner Electric • 800-825-9050 P-1405 • 819-0325