Warner Electric PCBC-825, PCBC-1000, PCBC-1225 - Manual (Page 20)

20 Warner Electric • 800-234-3369 P-205-01
•
819-0474
Shaft Size .937 – 3.000
Static Torque 465 lb. ft.
Maximum Speed 3,000 rpm
Standard Voltage D.C. 6, 24, 90
All dimensions are nominal unless otherwise noted.
* Mounting holes are within .010 of true position
relative to pilot diameter.
Customer Shall Maintain:
1. Concentricity of brake mounting pilot diameter
with mounting shaft within .010 T.I.R.
2. Squareness of brake magnet mounting face
with mounting shaft within .006 T.I.R measured
at magnet mounting bolt circle.
.171
Max.
.593
1.640
.593
1.640
.562
Max.
7.531
5.750
1.546
.921
4.625 Dia.
.093 When New
.093
When
New
3.250
5/16-18 UNC-3A
3.000
3.156
13.140
Max.
12.625
Dia.
5.877
Dia.
4.625
Dia.
6.906 Max.
Armature View
See page 34 for details
on Bore & Keyway.
See page 6 for details on
Drive Pin mountings.
Magnet View
(Inside & Outside Mounted)
.358/.338 dia. (8) holes
equally spaced on 13.000
dia.
Removable plug in ends
for 1/2" conduit.
.358/.338 dia. (6) holes equally
spaced on 7.250 dia.*
8.687
6.378/6.376
Pilot Dia.
3.750
13.875/13.871
Pilot Dia.
PCB-1225 Clutch-Brake Normal Duty Drawing I-25608