Warner Electric Electric Wheel Brake 12-1_4 x 3-1_2 Replacement - Manual (Page 4)

Parts Replacement Instructions
For ease of service, remove the brake from the
axle prior to disassembly. To replace a particular
kit, disassemble the brake only to the level at
which the new kit items can be installed, and
then reassemble. Refer to the exploded view on
page 2 to identify the reference numbers in the
text.
Replacing The Magnet
Kit No. 1301-100-014
See Page 3 for kit description
General Instructions
1. Refer to Figures 1 and 2 to determine which
style magnets your brakes are now
4 Warner Electric • 800-825-9050 819-0209
equipped with.
2. Refer to Figures 3 and 4 to determine which
style magnet arm your brakes are now
equipped with.
3. Refer to the proper instructions in the man-
ual regarding the specific replacement of
parts.
Note: New style, single, long-life magnet can
be used with either the old or new arm. Old
style, dual magnets will work only with old
style magnet arm. Do not use dual magnets
with new style magnet arm.
Figure 1 - New-style Long-life magnet
Figure 2 - Old-Style Dual magnets
Figure 5 - Wire Guide Spring
Figure 3 - New Lever Arm
Figure 4 - Old Lever Arm