Warner Electric Gen 2 Electrically Released Motor Brake Module for EM-MBFB and EUM-MBFB - Manual (Page 5)

Warner Electric • 800-825-9050 P-273-8 • 819-0531 5
Enclosed EM-20MBFB Module Option
If an Enclosed Brake-Module is required, an
optional Cover Kit, Warner Electric part number
5370-101-082, can be purchased separately to
enclose the open vents in the housing and a
cover plate to close off the back of the Module.
Each Cover Kit includes two (2) vent covers, four
(4) screws and one (1) cover plate needed to
convert a vented EM-20MBFB to an enclosed
design (non-washdown) as shown in Figure 2.
Figure 2
Note: When using this cover kit to enclose the
module the vent covers should be assembled as
the final step.
Notes:
Visit Warner Electric’s website at
www.warnerelectric.com for dimensional draw-
ings, weights, inertias, and a complete offering of
our products including clutches, brakes and
clutch/brake controls and service parts.
In addition, Warner Electric module products,
controls, and service parts information can be
found in our Packaged Electromagnetic
Clutches/Brakes Catalog P-1234-WE. Call
815-389-3771 to request any of our catalogs.