WEATHER GUARD 1915 - Manual

BOLT KIT
Bolt kit #32-0106 is provided with
your Mounting Base Kit.
Check this bolt kit to be sure the
following parts are included:
Qty. Description
2 5/16-18 x 1-1/4" Hex Hd. Bolt
4 1/4-20 x 1-1/4" Hex Hd. Bolt
4 5/16" Flat Washer
2 5/16-18 Blind Fastener
1 5/16-18 x 2-1/4" Blk Ox. Bolt
2 5/16" Lock Washer
2 Shims
1 Installation Tool
6 1/4-20 Nylon Lock Nut
4 5/16-18 Nylon Lock Nut
4 5/16-18 x 1" Carriage Bolt
10 1/4" Flat Washer
2 1/4-20 x 1-1/2" Carriage Bolt
ASSEMBLY AND INSTALLATION INSTRUCTIONS
PROTECT-A-RAIL® Louvered Cab Protector Models 1904 & 1905
PROTECT-A-RAIL® Cab Protector Models 1906 & 1907
TOOLS REQUIRED
• Electric Drill
• Drill Bits - 7/32", 1/4", & 1/2"
• Open or Box End Wrenches - 7/16", 1/2", & 9/16"
• 3/8" Drive Ratchet
• Sockets - 7/16" & 1/2"
• C-clamp
• Utility Knife
IMPORTANT
BEFORE YOU BEGIN
Read these instructions and
warnings completely before
installation.
WARNING
This product can reduce the driver’s ability to clearly see road-
ways, vehicular or pedestrian traffic and other objects through the
rear and side windows of the vehicle, which may cause an acci-
dent. Extra precautions should be taken when driving a vehicle
with this product. Make all adjustments necessary to ensure max-
imum visibility, including but not limited to, changing mirror and
seating positions. State and local laws may prohibit obstruction
of windows in a moving vehicle.
1916 - Mounting Base Kit for GM
1912 - Mounting Base Kit for Dodge
1913 - Mounting Base Kit for 1997 or
newer Ford light duty trucks
1915 - Mounting Base Kit for Ford super duty
and 1996 or older light duty trucks
Approximate Assembly and
Installation Time:
48 min. per unit (0.8 hrs.)
depending on Truck equipment
installation experience.
Part No. 24-0094 REV. C ECN 5285 03/13