White’s Electronics Spectra V3 SpectraSound Wireless Headphone - Manual (Page 2)

When selecting a channel other than Channel 4,
an ENABLE/CONNECT sequence is required -
Select Wireless Headphones and press ENTER.
1. Press ENTER to Enable “X” in box” (turn on) Wireless Headphone
transmitter.
2. Press Wireless Headphone Power Button to turn ON Wireless
Headphone.
3. If there is significant wireless channel interference, the built in
speaker will occasionally sound. A different Wireless channel should
be considered. To avoid cross talk between additional V3 detectors
with Spectrasound headphones, set each to a different wireless
channel.
4. Connect Sequence “AFTER CHANNEL CHANGE” – MENU/TAB to
Connect, Press ENTER, Hold Power button on Wireless Headphone,
beep-BEEP, beep-BEEP, and display prompts indicates connection
made, squeeze and release trigger to search with wireless activated.
5. CHANNEL SELECTING a different wireless channel to overcome any
local wireless interference.
• Arrow down to Channel, Select (arrow left & right) to find
a Channel free of interference. Color Bar indicates level
of external interference for each channel choice. Green
representing clear channel, Red representing external
interference. Ideally, select the channel with the largest
portion of green within the bar.
6. POWER LEVEL is provided to drive the headphone transmitter with
enough power to overcome any reasonable distance or wireless
signal resistance. Arrow down to Power Level, Select (arrow left &
More on SpectraSound™