White’s Electronics Spectra V3 SpectraSound Wireless Headphone User Manual
Page 3
right) a power level strong enough to provide quality sound.
In-field
operation at power levels less than 5 are not recommended.
7.
When Monitor Battery Speaker is selected “X” interference in wire
less data for any reason will cause the built in speaker to sound.
When Monitor Battery Speaker is not selected “empty box”, built in
speaker will never sound. Plug-in headphones and wireless head
phones (enabled) continue to operate normally.
Spectra V3 will also provide Wireless battery voltage -
•
Press MENU twice, Arrow down to Expert and press ENTER.
•
Arrow down to Information, press ENTER.
•
Note Wireless Voltage, at least 2 + volts.
•
Wireless will operate between 2 - 3+ volts. Under 2 volts
wireless performance becomes uncertain.
For more information on SpectraSound system,
including connecting to two or more headphones, please see the
“Complete Owner’s Guide”
.
TROUBLESHOOTING -
Substandard wireless sound, or built-in Speaker beeps when
Wireless are used.
•
Select a different wireless channel.
•
Increase Wireless Power
•
Turn OFF Monitor Speaker.
•
Check Wireless Battery.
•
See above voltage - replace as needed.
Channel
Power
Level