White’s Electronics TDI - Manual (Page 25)

PulseScan TDI Owner’s Guide 5
(will only be active when Gnd.Bal.
toggle is ON)
(If there is interference
select a quiet frequency)
INITIAL SET-UP -
To get started, set the controls to a mid-range position. For now, the main con-
cern is setting the threshold, and adjusting the settings for the other controls.
# - Set the controls to mid-range as follows -
Ground Balance 6
Conductivity All
Freq.Adj. 12 noon
Pulse Delay 10 uS
Gain 6
Gnd.Bal. toggle OFF
Check your Battery LED for charge level