Whitehall Manufacturing 4015 - Manual

Whitehall
Free-Standing
Swivette™
Includes Models
4010, 4012, 4015
Last Update: 09/25/13
Cabinet exterior surfaces are high pressure laminate. Optional Bedpan Washer mounts in lieu of the
Interior surfaces are stain-resistant melamine storage compartment and includes a handheld bedpan
laminate and stainless steel. Interior has a removable washer with volume control, positive shut-off and
stainless steel floor to conceal frame anchors. Specify stainless steel hose. An elevated pressure type
cabinet color selection. vacuum breaker by others is recommended with
this selection to prevent backflow or siphonage
Counter has a 3" backsplash and a bullnose front
from occurring and possibly contaminating the
edge. Surface is high pressure laminate. Specify
water supply. Consult local codes for back flow
counter color selection.
prevention devise requirements.
Lavatory is heavy gage, type 304 stainless steel,
self-rimmed, furnished with P-trap and wall flange.
Lavatory is always located on the opposite side of the
GUIDE SPECIFICATION
toilet.
Provide and install Whitehall Swivette ™ (specify
Lavatory Valve is a deck-mounted, hot and cold model number and options). Cabinet frame shall be
mixing valve with wrist blade handles and a 10" rigid heliarc welded, type 304 stainless steel, and shall not
gooseneck and conforms with CHSC 118675 lead free require wall support. Cabinet doors and panels shall
requirements. be high pressure laminate. Door on toilet side shall be
linked to toilet, so that when door is opened or
Toilet is stainless steel, siphon jet type with white
closed, the toilet will swivel accordingly. Door on
plastic seat and self-sustaining check hinge. Door
lavatory side shall be provided with a toilet paper
linkage swivels the toilet into the room when cabinet
holder. Doors shall support a 250 pound static,
door is opened. The toilet is locked in place when
vertical load. Front panels shall hinge open for access
open and must be unlatched to close. Toilet operates
to valves and piping. Bedpan storage cupboard shall
with a 1.6 GPF flush valve.
be provided above the toilet. Cabinet shall provide
Hydraulic Flush Valve is furnished standard with a
front toe space. Counter shall be high pressure
1-3/4" diameter, hydraulically actuated, remote
laminate with a 3" backsplash and bullnose front.
pushbutton. Minimum required flow pressure is 25
Lavatory bowl shall be heavy gage, type 304 stainless
PSI with a minimum water consumption of 1.28 GPF.
steel, self-rimmed, rectangular type, 9-1/2" x 14-1/2"
Swivel Assembly is cast iron with a sanitary white x 6" deep. P-trap shall be furnished. Toilet shall be
Enviro-Glaze finish, and has a positive watertight, stainless steel, elongated, siphon jet type, and shall
chemical-resistant seal. Swivel assembly requires flush in any position along the arc of movement. Trap
floor anchoring by others.Toilets will withstand a shall pass a 2-1/8" ball. Toilet shall withstand loadings
2,500 pound static vertical load. of 2,500 pounds without permanent damage. Toilet
seat shall have self-sustaining check hinge. Toilet to
Floor Anchors are seismic rated for CBC category IV
flush with a 1.6 GPF flush valve.
structures.
Fixture May Show Some Available Options
4010-L-1-CNCT
Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > (800) 782-7706 > (626) 968-6681 > Fax (626) 855-4862
4010
® Care-Ware Bedside Patient
Care Units
Please visit www.whitehallmfg.com
for most current specifications.
Recyclable
Product
Member of
U.S. Green
Building
Council
Complies
with the
following
standards:
Water
Conserving
Product