Acumen EON-2028HS - Manual (Page 40)

36
LAP
LAP
LAP
Step 3
Step 4
Step 5
Exercise Intensity (blinking)
- Press STR/LAP Button
B or STP/RESET
Button
C
to select HI (High), MED (Medium) or
LO (Low).
- Press MODE/NXT Button D to go to Step 5.
MET Parameter (blinking)
- Press STR/LAP Button
B or STP/RESET
Button
C
to adjust the value. (Refer to page 92
to determine your MET Parameter).
- Press MODE/NXT Button D to proceed to the
next item.
Drink Interval Timer (blinking)
The watch will remind you to drink during exercise
if the timer is set.
- Press STR/LAP Button
B or STP/RESET
Button C to adjust the value (Range: OFF, 1 to
60minutes).
- Press MODE/NXT Button
D
to back to the
"Fluid Loss ON" display.
Part II
B
D C
B
D C
B
D C