Acumen EON-2028HS - Manual (Page 85)

81
Part II
Step 1: Clamp PC Interface & Charger Connector to your watch with one
other end connects with the PC Interface & Charger. Make sure the
three pins in the clamp are properly in contact with the three contacting
points on the watch. (as shown in Figure 1)
Fig.1
Fig.2
Fig.3
LAP
Step 2: Plug the USB connector to your PC with the other end to the PC
Interface and Charger. (as shown in Figure 2)
Step 3: The wording "PC LINK" on the watch means it is ready for uploading
or downloading. (as shown in Figure 3)