Bg f e d – WolfVision EYE Series Mounting Kit User Manual
Page 9
8
Ceiling Tile
Ceiling Tile
EYE Series Mounting Kit
Part 2: Sheetrock Installation Guide
This lightweight mounting bracket is designed to support the WolfVision EYE Series models above sheetrock
ceilings. A safety cable anchor point is provided to secure the unit to the building structure. It is the
responsibility of the installer to ensure this product is properly supported and meets all local building codes
and plenum requirements. Make sure the ceiling structure is capable of holding at least 12 lbs. (4x the
combined weight of the mount and camera).
Steps:
I
Inspect Installation Location
1)
Determine mounting location ceiling based
upon the center of the desired focal point
on the working surface.
A minimum of 8
1
/
2
’’ clearance above
ceiling is required.
Center of installation must be at least 3
11
/
16
’’ from structural members in ceiling
to allow for hole clearance.
II
Assemble Unit
2)
A
Camera Bracket
B
Trim Mounting Screw
C
Mounting Tab
D
Mounting Screw
E
Mounting Screw
(Not used in sheetrock installation)
F
Rail Clamp Screw
G
Alignment Ring Nut
H
(Optional) Light Mask
3) Using Mounting Screw (
E
), attach Camera
Bracket (
A
) to circular plate.
Note: For installations using optional lenses,
longer brackets are available for purchase.
A
C
B
G
F
E
D
1
Sheetrock
H