AT&T Spirit Communications System - Manual (Page 32)

30
Paging/ Programming Multi-Purpose Buttons
Paging (2448 System)
■ Group Page
You can page all the telephones in one group. See page 5 for a list of groups.
●
Press INTERCOM.
●
Lift receiver (or press SPEAKER).
●
Dial two-digit
Make announcement.
group number (61-66).
If you have programmed a button for group paging, press that button (see below).
NOTE:
Only one person may answer a group page. All other extensions are disconnected from the
page when someone answers.
■ Loudspeaker Paging (For systems with optional public address system)
If there is a line button on your phone for the public address system, ● Press line button.
● Lift receiver (or press SPEAKER). Follow the instructions provided with the public address system.
If the line is not on a button on your phone,
●
Press INTERCOM.
●
Lift receiver (or press
SPEAKER). ● Dial 8. ● Dial two-digit line number (01-24) of the loudspeaker. Follow the
instructions provided with the public address system. Make announcement.
Programming Multi-Purpose Buttons (2448 System)
To program a button for SpeedCall, see page 34.
To program a button for any other purpose, continue to the next page for instructions.